Refresh Rate vs Response Time: What’s the Difference?

Lokesh Kapoor
Lokesh Kapoor
Disclosure: This website may contain affiliate links, which means I may earn a commission if you click on the link and make a purchase. I only recommend products or services that I personally use and believe will add value to my readers. Your support is appreciated!

Refresh rate vs response time comes down to two different jobs. Refresh rate, in hertz (Hz), is how many times per second the monitor draws a new image. Response time, in milliseconds (ms), is how quickly each pixel changes colour to show it.

Higher Hz makes motion smoother, and faster pixels keep it from smearing. The refresh rate is the number you can trust, while the “1ms” printed on the box often describes a best case you won’t see.

Key takeaway

  • Refresh rate (Hz): image updates per second. 144Hz shows a new frame every 6.9 ms; 60Hz every 16.7 ms.
  • Response time (ms): how long a pixel takes to switch from one shade to another, usually quoted as grey-to-grey (GtG).
  • They depend on each other: pixels need to finish changing within one frame, or fast motion leaves trails.
  • Ignore the box’s 1ms: check independent response time measurements with overshoot, the panel type and any VESA ClearMR rating instead.

Refresh rate vs response time at a glance

Refresh rateResponse time
What it measuresHow often the whole image is updatedHow fast a single pixel changes colour
UnitHertz (Hz), updates per secondMilliseconds (ms)
Common values60Hz, 144Hz, 165Hz, 240Hz, 360Hz, 480Hz1ms to 5ms quoted; real averages vary widely
Better isHigherLower
What you noticeSmoother scrolling and motion, less delay between framesLess ghosting and smearing behind moving objects
How reliable the spec isReliable, if your GPU and cable can deliver itOften a best-case figure measured at an aggressive setting
Last checked: November 2026.

What refresh rate means

A 60Hz monitor shows 60 new images per second, so each one stays on screen for 16.7 ms. At 144Hz that drops to 6.9 ms, and at 240Hz to 4.2 ms. Shorter frames mean smoother motion, a quicker view of new information and less blur when your eyes track a moving object.

Refresh rateTime per frameWho it suits
60Hz16.7 msOffice work, films, consoles locked to 60 fps
120Hz to 144Hz8.3 to 6.9 msMost PC and console gamers, smoother everyday scrolling
165Hz to 180Hz6.1 to 5.6 msCommon on budget gaming monitors, small step over 144Hz
240Hz4.2 msCompetitive shooters with a GPU that can hold high frame rates
360Hz to 480Hz2.8 to 2.1 msEsports players chasing every frame
Frame time = 1000 ÷ refresh rate.

Two things limit what you get. Your graphics card has to render enough frames per second to fill those refreshes, and the cable has to carry them. A 1440p 240Hz monitor needs DisplayPort or HDMI 2.1 bandwidth; our guide to HDMI, DisplayPort and USB-C explains which port to use.

What response time means

Response time measures how long a pixel takes to move from one shade to another. Brands usually quote grey-to-grey (GtG), and the common convention times only the middle of the change, from 10% to 90% of the way. The slow start and finish are left out.

Close-up of monitor pixels changing colour, showing response time in refresh rate vs response time

LCD pixels are pushed faster with overdrive, which briefly applies extra voltage. Too much overdrive makes a pixel overshoot its target colour, which shows up as a bright or dark outline trailing behind moving objects, often called inverse ghosting. OLED pixels switch almost instantly, so OLED monitors don’t need overdrive and rarely show either problem.

How refresh rate and response time work together

Response time has to fit inside the frame time. On a 240Hz monitor each frame lasts 4.2 ms, so pixels that take 6 ms to finish are still changing when the next frame arrives. You see that as smearing, and the high refresh rate is partly wasted. A 144Hz monitor with the same pixels would look cleaner than its spec sheet suggests.

Even perfect pixels leave some blur. LCD and OLED monitors hold each frame on screen until the next one, and your eyes keep moving while they track an object. Blur Busters puts it as a simple rule: 1 ms of frame visibility equals 1 pixel of blur for motion at 1,000 pixels per second.

That’s why going from 60Hz to 144Hz cuts blur so clearly, even on a monitor with average pixel response.

Why “1ms” on the box is often a marketing number

  • MPRT is not GtG. Moving Picture Response Time (MPRT) measures how long each frame stays visible. On a normal monitor it can’t be shorter than one frame, so 1ms MPRT on a 165Hz screen is only possible with backlight strobing, a mode that flickers the backlight, dims the image and on many models can’t run alongside adaptive sync.
  • The fastest setting is used. The GtG figure is often measured at the most aggressive overdrive mode, the one that adds the most overshoot. The mode you’d want to use daily is usually slower.
  • Best case, not average. One quick transition can produce a 1ms headline while dark transitions on the same panel take several times longer. VA panels are known for slow dark-to-grey changes that leave black smearing.
  • No single standard. There’s no rule on which transitions or thresholds a brand must use, so two “1ms” monitors can look very different in motion.

⚠️ Watch out for: listings that quote “0.5ms” or “1ms MPRT” without saying it needs a strobing mode. Read the manual or a review to see which mode the number comes from and what it disables.

What to look at instead of the box number

  • Refresh rate your PC or console can use. A 240Hz monitor fed 90 fps behaves closer to a 90Hz one.
  • Independent measurements. RTINGS’ monitor response time testing measures many transitions at each overdrive setting and reports overshoot, which shows how a monitor looks in its usable mode.
  • VESA ClearMR. VESA’s ClearMR certification rates motion clarity from ClearMR 3000 to 21000 and limits overshoot tricks during testing. Higher is clearer. Not every monitor is certified, so treat it as a bonus, not a requirement.
  • Panel type. OLED has the fastest pixels, good IPS panels are close behind at 144Hz to 240Hz, and VA trades contrast for slower dark transitions. Our IPS vs VA vs OLED comparison goes deeper.
  • A usable overdrive mode. Reviews that say “use the Normal setting” are more useful than the fastest figure on the box.
What the box saysWhat it may meanWhat to check
1ms GtGFastest transition at the strongest overdriveMeasured average response and overshoot in a review
1ms MPRTBacklight strobing modeBrightness and adaptive sync support in that mode
0.03ms GtG (OLED)OLED pixel switching, close to instantRefresh rate, burn-in warranty, brightness
240Hz, 1msFast refresh, unknown real responseWhether pixels finish inside 4.2 ms at a usable setting
Based on Blur Busters, VESA and RTINGS documentation. Last checked: November 2026.

Which matters more for you?

Competitive gamers

  • Best for: 240Hz or higher with response measured well inside the frame time, usually a fast IPS or OLED panel.
  • Not ideal for: VA panels at 240Hz, where dark transitions often can’t keep up.
  • Watch out for: buying 360Hz with a graphics card that can’t push the frame rates to match.

Everyday and AAA gamers

  • Best for: 144Hz to 180Hz IPS or a VA panel with good reviews. This range gives the biggest jump over 60Hz for the money.
  • Not ideal for: 60Hz panels sold as “gaming” monitors because of a 1ms claim.
  • Watch out for: overdrive set to its fastest mode by default. Try the middle setting first.

Office work, study and films

  • Best for: 60Hz to 120Hz with good colour and sharpness. Response time barely matters for documents and video.
  • Not ideal for: paying extra for 240Hz you won’t use.
  • Watch out for: skipping 100Hz or 120Hz if the price gap is small. Smoother scrolling is noticeable even in spreadsheets.

Common mistakes

  • Comparing monitors by the response time on the box, when brands measure it differently.
  • Leaving the monitor at 60Hz after buying it. Set the refresh rate in Windows display settings and use the right cable.
  • Turning overdrive to maximum and wondering why moving objects have bright halos.
  • Turning on the MPRT or strobing mode for every game and losing brightness and adaptive sync.
  • Paying for a higher refresh rate than your GPU, console or games can use.

What to buy

For most gamers, a 144Hz to 180Hz IPS monitor is the sweet spot. Our picks of gaming monitors for 144Hz play are the place to start; check reviews for the recommended overdrive mode.

Competitive shooter players with a capable GPU should look at our list of 240Hz esports monitors. If you prefer a wide, immersive screen for single-player games, browse our curved monitors worth buying, many of which use VA panels, so read the dark-transition notes in reviews.

Console players on a big screen face the same trade-offs. Our guide to 4K TVs for gaming covers 120Hz TVs and HDMI 2.1.

How we researched this

This explainer is research-based, not hands-on tested. We used Blur Busters’ GtG vs MPRT explainer, VESA’s ClearMR specification summary and RTINGS’ published monitor test methods. Frame times are calculated from refresh rates. We haven’t measured any monitors ourselves. Last checked: November 2026.

Frequently asked questions

Refresh rate vs response time: which is more important for gaming?

Refresh rate usually matters more, because it sets how often you get new information and how much motion blur you see. Response time matters once the refresh rate is high: pixels need to finish changing within each frame. A 144Hz monitor with decent response beats a 60Hz monitor with a 1ms claim.

Is 1ms response time worth it?

A true fast response is worth it for gaming, but the 1ms label alone tells you little. Brands often measure it at the most aggressive overdrive setting or quote MPRT with backlight strobing. Look for review measurements of average response and overshoot at the setting you’d use every day.

Is 5ms response time good for gaming?

5ms GtG is fine for casual gaming at 60Hz to 144Hz, as long as it’s measured at a usable setting. At 240Hz each frame lasts 4.2 ms, so 5ms pixels will smear slightly. Competitive players at high refresh rates should look for measured averages well under the frame time.

What is the difference between GtG and MPRT?

GtG measures how long a pixel takes to change from one shade to another. MPRT measures how long each image stays visible, which drives the blur your eyes see when tracking motion. On a normal monitor MPRT can’t be lower than the frame time, so very low MPRT figures need backlight strobing.

Does 144Hz need a fast response time?

Yes. At 144Hz each frame lasts about 6.9 ms, so pixels should finish most transitions within that time to avoid trails. Most current IPS gaming monitors manage this at a sensible overdrive setting. Some VA panels struggle with dark transitions, which shows up as black smearing in dim scenes.

What overdrive setting should I use?

Start with the middle setting, often called Normal or Fast. The strongest mode usually adds overshoot, which shows as bright or dark halos behind moving objects. Use a moving test pattern or a fast game, and pick the setting that looks cleanest. Reviews often name the best mode for each monitor.

Is OLED response time better than IPS?

Yes. OLED pixels switch almost instantly, so OLED monitors have very little smearing or overshoot at any refresh rate. Fast IPS panels come close at 144Hz to 240Hz with good overdrive tuning. OLED still shows sample-and-hold blur, which only a higher refresh rate reduces.

Can a higher refresh rate reduce input lag?

Yes, partly. At 240Hz a new frame appears every 4.2 ms instead of 16.7 ms at 60Hz, so you see the result of your input sooner. Total input lag also depends on the monitor’s processing, your frame rate and the game, so refresh rate is one part of it.

Our verdict

In the refresh rate vs response time question, buy on refresh rate first and check response time second. Choose 144Hz to 180Hz for most gaming, 240Hz or more for competitive shooters with a strong GPU, and 60Hz to 120Hz for work and films.

Then confirm that the pixels keep up in independent reviews at a usable overdrive setting, and treat any 1ms or 0.5ms figure on the box as a hint, not proof. A ClearMR rating or OLED panel is the clearest sign of good motion. If you still need help with size, resolution and panel type, our guide to how to choose a monitor walks through that order.

Share This Article
Leave a Comment

Leave a Reply

Your email address will not be published. Required fields are marked *